Logo Studenta

14 Acumulación de energía térmica en el subsuelo - Mario Sánchez

¡Este material tiene más páginas!

Vista previa del material en texto

Generalmente la acumulación de energía térmica en el subsuelo se 
realiza entre estaciones
1. Acumulación de energía térmica en acuíferos (Aquifer Thermal Energy 
Storage - ATES) 
2. Acumulación de energía térmica en cavernas (Rock Cavern Thermal
Energy Storage - CTES) 
3. Acumulación de energía térmica en perforaciones/sondas (Borehole
Thermal Energy Storage – BTES)
4. Otros:
Pit Thermal Energy Storage (PTES)
Dificultades:
- Scaling: precipitación de 
por ejemplo de 
carbonatos en sistemas 
con temperaturas sobre 85 
degC y óxidos de Fe y Mn 
en bajas temperaturas (< 
40 degC) 
- Corrosión química y 
electroquímica
- Interferencia entre pozos
- Ambiental? (hay carencia 
de trabajos en esta área)
• Hay pocos ejemplos de esta tecnología 
en el mundo
• Las primeras utilizaciones comienzan en 
Suecia por los inicios de los 80s
• Se pueden usar minas abandonadas, 
túneles o cavernas
3. Borehole Thermal Energy Storage – BTES
•
•
In the cold season, the heat stored in the outside of the array is used 
for heating.
Water from the store at around 15–20 C is passed through a heat 
pump, which in turn provides water around 40–50 C for use in 
building heating.
While the groundwater passes through the heat pump it cools to 
around 7–10 C.
The cooled water is return to the center of the underground array. 
Thus, charging the store with cold energy for use in summer.
During the warm season, water from the cold store at 
around 7–10 C is passed through a heat exchanger 
providing direct cooling water to the building. The heat
pump is available automatically as support in periods 
of peak demand. The store circuit water will pick up 
energy from the building and thus be raised in 
temperature to around 18–20 C (or higher for fresh air 
load). This water, the temperature of which is higher 
than the natural groundwater temperature, will be run 
to the outside of the array and charge the store with 
warm energy.
4. Pit Thermal Energy Storage (PTES)
https://usmcl-my.sharepoint.com/:v:/g/personal/adrian_ortiz_usm_cl/EbjfJyRfzVFDhTJ8uoIQVsIBBQzQCV90AsTELDHkoy3v-Q?e=zkeGSz

Continuar navegando

Otros materiales